Repairing a Cagiva Mito End Can silencer
Here is an alternate way of repairing an end can if the carbon-kevlar
tube is not totally junked and replacing is not mandatory.
The part of the damaged tube must be removed. I would still be
The part of the damaged tube must be removed. I would still be
comfortable if the rest of it is 20cm in length at least. Use a piece of
thick sandpaper to mark your cutting line. Any metal saw will do the
rest of the job.
The same length should be removed from the perforated pipe.
And then welded back in again if necessary.
BUY our ultimate Cagiva Mito 125 workshop manual bundle HERE
The same length should be removed from the perforated pipe.
And then welded back in again if necessary.
BUY our ultimate Cagiva Mito 125 workshop manual bundle HERE
No comments:
Post a Comment
No spam