Cagiva mito 125 for sale here on Ebay UK
Cagiva Mito Engine recommended rebuild parts
I always use LONG con rods , no reason other than they have always been excellent for me, other may be just as good , in fact i have heard rumours Mitaka Kits are very similar if not the same .
Mark crank so you can split but get it back together as near as possible .
Press the cranks apart this is hard sometimes it involves cutting then in half with a grinder other times they split relatively easy .
Press new pin in one side of the crank webs then assembly con rod kit on the pin .
press fit the crank together
its then just a matter or making sure the crank is trued correct , which can be fiddly but not too difficult .
here are the V blocks - dial gauges and Engineers plate i bought to do mine .
V blocks magnetic on Ebay UK
Dial Gauges on Ebay UK
Engineers flat surface plate on Ebay UK ( these are hardest to find good )
and the press i use is a 20 ton cheapest one i could afford , but it does the job , see them
Here on Ebay uk
BUY our ultimate Cagiva Mito 125 workshop manual bundle HERE
No comments:
Post a Comment
No spam