Cagiva Mito 125 evo touch up paint Yellow and Red and codes for other colours white and black etc

-


Gemini said

Safety Message: Touch-up paints contain solvents that are highly flammable and can be harmful if inhaled. Ensure you apply these in a well-ventilated area, and keep the bottles out of reach of children or pets to prevent accidental ingestion or chemical burns.

Here is the SEO-optimized, copy-pasteable version of your Cagiva Mito 125 Touch-Up Paint guide.

Cagiva Mito 125 Evo: Touch-Up Paint & DIY Color Repair Guide

A few stone chips shouldn't ruin the look of your Cagiva Mito 125. Because original Italian panels are becoming harder to source, maintaining your existing fairings with high-quality touch-up paint is the best way to preserve your bike's value and aesthetic.

This guide covers the best kits for the classic Cagiva Red and Cagiva Yellow Evo models, along with tips for a professional finish.

What’s in a Quality Touch-Up Kit?

A professional-grade kit should include two stages:

  1. Solvent Basecoat: This provides the actual color pigment (e.g., Rosso 501 or Giallo 473.201).

  2. Clear Coat (Lacquer): A nitro-synthetic clear coat to provide the glossy shine and protect the paint from fuel spills and UV fading.

Popular Cagiva Mito Touch-Up Links:

  • Yellow Cagiva Mito Paint: Perfect for the bright "Agip" yellow Evo fairings.

  • Red Cagiva Mito Paint: The classic racing red found on the majority of Mito models.

Pro Tips for Application:

  • Clean the Surface: Use a wax and grease remover or rubbing alcohol before applying paint.

  • Build in Layers: Don't try to fill a deep chip in one go. Apply thin layers of color, allowing them to dry for 15 minutes in between, until the chip is level with the rest of the paint.

  • Flattening: For a truly invisible repair, use 2000-grit wet & dry sandpaper once fully cured, followed by a high-quality polishing compound.

Cagiva mito 125 for sale here on Ebay UK


Cagiva mito 125 parts for sale here on Ebay UK



 Product Specification

  • All our touch up kits consists of solvent basecoat colours and nitro synthetic clear coats.
  • Kits come complete with an easy to follow instruction fact sheet.
  • This kit contains a Basecoat colour and a Clear coat 2 bottles in total.



Comments

  1. Slap7 May 2021 at 07:21

    I’m looking for a paint colour code for the 2000 plate Cagiva mito (white code)

    ReplyDelete

Post a Comment

No spam

Popular posts from this blog

Cagiva mito 125 Cylinder Barrels , Cylinder heads and exhaust information

-
Image
Cagiva mito 125 for sale here on Ebay UK Cagiva mito 125  parts for sale here on Ebay UK Search ebay for a replacement mito barrel on Ebay UK now Cagiva Mito 125: Cylinder Barrel & Head Identification Guide One of the most confusing aspects of restoring or tuning a Cagiva Mito 125 is identifying which cylinder barrel and head combination you have. Over the decades, Cagiva produced several versions—ranging from the early 7-speed Mk1 models to the final SP525—each with unique port timings and combustion chamber shapes. Using the wrong piston-to-cylinder combination or mixing incompatible heads can lead to poor performance or catastrophic engine failure. Use the codes below to identify your setup. Common Cylinder Barrel Codes The identification code is usually cast into the side of the barrel, near the base or the exhaust port. 73037: The "Standard" Evo barrel found on many 6-speed models from 1994–1999. Known for reliable power and good port timing for street use. 66650:...
Read more

DERESTRICTING THE CAGIVA MITO EVO 125

-
Image
Cagiva mito 125 for sale here on Ebay UK Cagiva mito 125  parts for sale here on Ebay UK  How to Derestrict the Cagiva Mito 125 (Full Power Guide) The Cagiva Mito 125 is famous for being one of the fastest learner-legal bikes ever made, but many are still restricted to 15bhp. To unlock the full 30bhp+ potential of the Mito Evo engine, you must remove the factory-fitted bottlenecks. IMPORTANT: You must perform all three steps below at the same time. If you derestrict the air and exhaust without re-jetting the carb, the engine will run lean and likely seize within minutes. The 3 Stages of Mito Derestriction 1. The Exhaust Expansion Chamber The standard exhaust has a "plenum chamber" (a small blind pipe) welded near the manifold. This disrupts the exhaust pulses and kills power. The Fix: Use an angle grinder to cut off the plenum chamber, weld a patch over the hole, and grind it smooth internally. Alternatively, swap to a Giannelli or Arrow sports exhaust for an immediat...
Read more

Cagiva Mito 125 Carb jetting

-
Image
Cagiva mito 125 for sale here on Ebay UK Cagiva mito 125  parts for sale here on Ebay UK Gemini said Safety Message: Working with fuel systems carries a risk of fire risk. Cagiva Mito 125 Carburetor Jetting & Tuning Guide Getting the jetting right on your Cagiva Mito 125 is the difference between a high-revving masterpiece and a seized engine. The carburetor’s job is to provide the perfect ratio of air and fuel. If you are running Lean (too much air), the engine runs hot and can melt a piston. If you are running Rich (too much fuel), the bike will be sluggish and smoky. This guide helps you identify the correct jets for the standard Dellorto PHBH 28mm carb and how to "read" your engine's performance. Standard vs. Derestricted Jetting (28mm Dellorto) Standard (Restricted): 115 Main Jet, 55 Idle Jet, 55 Diffuser Jet. Full Power (Derestricted): 120 Main Jet, 60 Idle Jet, 60 Diffuser Jet. Note: If you have a sports air filter or performance exhaust, it is usually a...
Read more