Need a new regulator rectifier try Ebay UK here
Need generator alternator try Ebay UK here
First ill show a quick test on diodes inside you regulator rectifier .
You are just checking current flow through the regulators diodes in forward and reverse bias.
connect + lead of multimeter to further left connector pin
and common lead to 2nd pin from left you should get a voltage reading of around 0.6
here i get 0.52 which is ok
then test 3rd pin from left it should give same reading
now connect common lead of multimeter to left pin and + lead
of meter to the second pin from left you should get OL telling you no
current is flowing as it should be.
Now test with + lead of meter to third pin from left and same OL
no current flow
now connect common lead to the further right hand side
and + lead to second from left you should see 0.6v i get 0.52 which is ok
move red + lead to thurd pin from left and should get 0.6v again i get 0.506 which is ok
Switch + lead to further right pin and touch blue to second and
third pins and you should get 0L no current flowing
That is a quick test the rest of images that follow show tests from Cagiva Mito workshop manual
No comments:
Post a Comment
No spam